据ICIS网站11月20日莫斯科报道 2019年1-10月俄罗斯高密度聚乙烯（HDPE）进口同比增长44%。

根据MRC的DataScope报告，管道级和薄膜级聚乙烯（PE）进口量增长最大。

10月份高密度聚乙烯进口量从一个月前的34500吨下降到28200吨，其中乌兹别克高密度聚乙烯占主要降幅。

2019年前10个月，高密度聚乙烯进口总量达到295100吨，而去年同期为204400吨。

所有消费部门的聚乙烯进口都有所上升，其中薄膜和管道级高密度聚乙烯的进口量增幅最大。

2019年前10个月，管道级聚乙烯进口量同比几乎翻了一番，达到45800吨，主要来自沙特阿拉伯和韩国的生产商。

薄膜级高密度聚乙烯的进口量达到105400吨，上年同期为65300吨。过去几年，乌兹别克斯坦一直是这一领域的关键供应商。

注射成型高密度聚乙烯的进口增幅最小，1-10月进口总量略高于53000吨，而去年同期为46800吨。乌兹别克斯坦、阿联酋和泰国是主要供应商。

王磊 摘译自 ICIS

原文如下：

Russia HDPE imports up by 44% in Jan-Oct year on year

Imports of high density polyethylene (HDPE) into Russia grew in January-October 2019 by 44% year on year.

Pipe grade and film grade polyethylene (PE) accounted for the greatest increase in imports, according to MRC’s DataScope report.

October HDPE imports fell to 28,200 tonnes from 34,500 tonnes a month earlier, with Uzbek HDPE accounting for the main decrease.

Overall HDPE imports reached 295,100 tonnes in the first 10 months of 2019, compared to 204,400 tonnes in the same period a year earlier.

PE imports rose in all consumption sectors with film and pipe grade HDPE accounting for the largest increase in shipments.

Imports of pipe grade PE almost doubled year on year in the first 10 months of 2019 to 45,800 tonnes. Producers from Saudi Arabia and South Korea accounted for the bulk of shipments.

Imports of film grade HDPE reached 105,400 tonnes versus 65,300 tonnes a year earlier. Uzbekistan has been the key supplier in this segment for the past years.

Injection moulding HDPE accounted for the smallest increase in imports, totalling slightly more than 53,000 tonnes over the stated period versus 46,800 tonnes a year earlier. Producers from Uzbekistan, the UAE and Thailand are the main suppliers.