据ICIS网站10月23日莫斯科报道 根据MRC DataScope报告，2019年前三季度乌克兰市场的聚碳酸酯（PC）进口总量同比增长19%，达到3000吨。

在此期间，注塑级聚碳酸酯的份额从去年同期的64%（1600吨）下降至51%（1500吨），而挤压级聚碳酸酯的份额从总进口量的15%（400吨）上升至30%（900吨）。

对于吹塑级聚碳酸酯，份额从21%（500吨）略下降至20%（600吨）。

上月乌克兰市场聚碳酸酯进口同比增长50%，从273吨增至410吨。

8月份的材料出货量为383吨。

王磊 摘译自 ICIS

原文如下：

January-September PC imports to Ukrainian market rose by 19% year on

Overall imports of polycarbonate (PC) granules to the Ukrainian market grew in the first three quarters of 2019 by 19% year on year to 3,000 tonnes, according to MRC’s DataScope report.

The share of injection moulding PC grades decreased to 51% (1,500 tonnes) for this period from 64% (1,600 tonnes) a year earlier, while the share of extrusion grade PC rose from 15% (400 tonnes) of total imports to 30% (900 tonnes).

For blow-moulding PC grades the share dropped slightly from 21% (500 tonnes) 20% (600 tonnes).

Last month’s imports of PC granules to the Ukrainian market grew by 50% year on year, from 273 tonnes to 410 tonnes in September 2018.

August shipments of material were 383 tonnes.