标准号: | ASTM F738M-2002(2008) | |
标准名称: | 不锈钢公制金属螺栓、螺钉及螺柱规格 | |
英文名: | Standard Specification for Stainless Steel Metric Bolts,Screws,and Studs | |
标准状态: | ||
语言: | 英 | |
页数: | 9 | |
文件类型: | ||
文件大小: | ||
发布时间: | - | |
实施时间: | 2002-4-10 | |
替代标准: | ASTM F738M-2002 | |
标准备注: | ASTM F738M-2002(2008) 不锈钢公制金属螺栓、螺钉及螺柱规格 被替代标准: 代替标准:ASTM F738M-2002 作废日期:2015-01-01 引用标准:ASTM A276;ASTM A751;ASTM A380;ASTM A555/A555M;ASTM A342/A342M;ASTM A564/A564M;ASTM A484/A484M;ASTM A582/A582M;ASTM A493;ASTM D3951;ASTM F606M;ASTM E29;ASTM F836M;ASTM E353;ISO 3506;ASTM F1470 采用标准: 范围:1.1 This specification covers the chemical and mechanical requirements for stainless steel metric bolts, screws, and studs with nominal thread diameters M1.6 through M36 and is intended for use in engineering applications requiring general corrosion resistance. 1.2 Eight groups of stainless steel alloys are covered, including three austenitic (Grades A1, A2, and A4), one ferritic (Grade F1), three martensitic (Grades C1, C3, and C4), and one precipitation hardening (Grade P1). 1.3 Twenty property classes are covered, including nine austenitic, two ferritic, eight martensitic, and one precipitation hardening. The property classes with the permissible alloys for each are listed in Table 1. 1.4 This specification is based in concept and content on ISO 3506. The chemical and mechanical requirements specified for all property classes, except as given in 1.4.1, are essentially identical with classes of the same designation in ISO 3506. 1.4.1 This specification includes all of the |
|
下载权限: | 所有人 | |
点击率: | 330 | |
下载次数: | 0 | |
在线浏览: | 阅 读 | |
点击下载此标准>> |
>>该类更多标准
更多>>·ASTM F1123-1987(2015) 非金属伸缩接头规格 [1925]
11/18·ASTM B88M-2013 无缝铜水管规格(米制) [1442]
11/18·ASTM A765/A765M-2007(2012) 具有强制性韧性要求的压力容器部件用碳素钢及低合金钢锻件的规格 [1575]
11/18·ASTM G40-2015 磨损和腐蚀的相关术语 [651]
11/12·ASTM F2324-2013 预清洗喷雾阀的试验方法 [681]
11/12